800.486.2681 Monday-Friday 8AM - 4PM EST

Click here to see our BLOWOUT SPECIALS

X

1-800-486-2681

For Enthusiasts by Enthusiasts

Monthly Archives: April 2014

  • Ford Racing Power Up 5.0 4V Engine & Control Pack

    Ford Power Up Promo

    Check out this new Ford Racing Power Up 5.0 4V Engine & Control Pack deal. Ford Racing's all-aluminum 5.0L Mustang crate engine is a modern 5.0L 32-valve DOHC V-8 that uses advanced features like Twin Independent Variable Camshaft Timing (Ti-VCT) to deliver 420 horsepower @ 6500 rpm and 390 ft.-lb.+ of torque @ 4250 rpm (with premium fuel). The lightweight aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength. Optimized oil drainback and windage control improve high-rpm performance. These features make this engine and control pack ideal for any "swap" project. This lit is ideal for any retro mod or even a Coyote swap in any year Ford Mustang - this is a real plug and play comination and best of all now through May 31st 2014 this kit is available from Brothers Performance at a very special price that saves you nearly $1500 and add to that FREE Shipping. If you are thinking about geting this great power combination now is the time - take a look at all the specs below, they will help you make a final decision and tell you that this is the best engine choice for your upcoming project. Check Out The Special Savings Here

    M-6007-M50

    Ford High-performance 5.0-liter, four-valve Ti-VCT engine
    420 horsepower @ 6500 rpm
    390 ft.-lb.+ of torque @ 4250 rpm
    Displacement 302 cu. in.
    3.63 bore x 3.65-in stroke
    Aluminum block
    Forged steel crankshaft
    Forged steel connecting rods
    Hypereutectic aluminum pistons
    Aluminum cylinder heads, DOHC, four valves per cylinder, Variable intake and exhaust camshaft timing
    8qt capacity oil pan
    11.0:1 Compression ratio
    Tuned composite intake manifold provides efficient air delivery and weight savings
    80 mm single bore "drive by wire" throttlebody
    Mustang GT 409 stainless-steel tubular exhaust manifolds - See BBK Coyote Swap Long Tube Headers Here 
    Includes manual transmission engine harness and flywheel
    Ford Racing's NEW wiring, PCM and installation kit M-6017-A504V is included and has been designed for street rod/project car installation.

    M-6017-A504V

    Designed to run the M-6007-M50 and M-6007-A50NA 5.0L 4V Ti-VCT crate engine with manual transmission.

    Includes PCM with Ford Racing calibration
    Includes Electronic Throttle Control accelerator pedal eliminates throttle cable routing problems
    Unique controls pack harness replaces stock body harness and is designed for street rod installation
    Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis
    Includes power distribution module, air box, inlet tube, MAF sensor, and HEGO sensors
    PCM with Ford Racing calibration requires return type fuel system, will not work with returnless fuel system
    NOTE: Installation of this PCM in a 2011-2014 Mustang GT will result in a no-start condition.

    Does not include alternator, for alternator kit see M-8600-M50BALT
    5.0L Mustang engine cover kit available, see M-9680-M50
    Use Oil Line Adapter M-6881-M50 for applications requiring oil filter relocation
    Engine mount bosses and bellhousing mount pattern common to 4.6L modular engines.
    Photo and specs may vary. These features apply for engine code EG-397-AA. Engines are this build code or newer while supplies last.
    Engines built after 8/8/13 are equipped with a water pump using a 3-bolt pulley pattern.
    Engine weight: 444 lbs
    Take the complexity and mystery out of wiring a late model 5.0L 4V Ti-VCT engine!

    Download Engine Dimensions PDF Chart Here

    Check Out The HotRod Magazine Installation Article & Guide Here

    This entry was posted in Special Offers and tagged Ford racing, coyote engine, 5.0 coyote engine, coyote engine swap, resto mod engine on April 8, 2014 by Brothers Performance.

  • Ford Announces Mustang 50th Birthday Celebrations

    1964_Worlds_Fair_Ford_Exhibit_1965_Mustang

    DEARBORN, MI- Ford announces Mustang 50th birthday celebrations schedule of events slated to celebrate the 50thanniversary of the Mustang, which was first unveiled April 17, 1964. The events, including a throwback stunt at the Empire State Building, run from April 10 through May 4 in cities across the U.S. Only one event, a private employee celebration, is scheduled for Michigan. Over the past five decades, more than 9 million Mustangs have been sold. The 2015 Mustang is expected to go into production by mid-2014 at Ford's Flat Rock Assembly Plant in Michigan and arrive in U.S. showrooms in the fall. Ford is doing a staggered global release, with the vehicle arriving in global markets, including Europe and Asia, through 2015. U.S. ordering is expected to begin in the summer.

    Here's a look at the events with links for more details:

    April 10-16 – Mustangs Across America 50th Anniversary Drive Mustangs Across America is organizing a caravan from Los Angeles to Concord, N.C. More than 500 Ford Mustangs are expected to join the drive by the time the caravan reaches the Mustang Club of America celebration at Charlotte Motor Speedway.

    April 13-16 – Mustang Club of America Great American Pony Drive Mustang enthusiasts from around the world will gather in Norman, Okla. on April 13 before driving to the dual celebrations organized by the Mustang Club of America. In Norman, attendees will split into two groups, one setting out for Charlotte Motor Speedway, the other heading to Las Vegas Motor Speedway.

    April 16-17 – 2015 Ford Mustang at the Empire State Building Ford will celebrate 50 years since the public introduction of Mustang by putting a 2015 model convertible on the 86th floor observation deck of the Empire State Building in New York. The car will be on public display, 1,000 feet above the street, both days from 8 a.m. to 2 a.m.

    April 16-20 – Mustang Club of America 50 Year Celebrations  The celebrations are expected to be so large that Mustang Club of America has organized two simultaneous events, at Charlotte Motor Speedway and Las Vegas Motor Speedway. The events are open to the public and include displays of Mustang from all 50 years, Ford vehicle ride-and-drives, cruises and Mustang history sessions.

    April 17 – 2015 Ford Mustang at Flushing Meadows, N.Y. The original Mustang was first shown to the world at the 1964 World's Fair in New York. Ford will go back to the fair site at Flushing Meadows Corona Park for a small gathering of local Mustang club members and the all-new 2015 Mustang.

    April 17 – Ford Employee Celebration Ford Motor Company will host an employee celebration of Mustang at Ford World Headquarters in Dearborn, Mich., 50 years to the day of the Mustang introduction. This event is only open to Ford employees and is a private event.

    April 27 – Fabulous Fords Forever Car Show at Knott's Berry Farm The Ford Car Club Council will host the Fabulous Fords Forever car show at Knott's Berry Farm in Buena Park, Calif.

    May 3-4 – Mustang Madness at Petersen Museum The Petersen Museum in Los Angeles will celebrate 50 years of Mustang with special events including a car show and guests including champion drifter Vaughn Gittin Jr.

     

    This entry was posted in News and tagged ford mustang 50th aniversary, 50 years of Mustang, "50 years of ford Mustang", ford mustang 50th, mustang celebrations, Ford Mustang 50 on April 7, 2014 by Brothers Performance.

  • New Parts Installation And Dyno Test Center Video



    See our Brothers Performance new parts installation and dyno test center video here that shows our state of the art modern clean facility where we can install many performance parts on any late model Ford, Chevy or Dodge performance car or truck. Our professional team of certified mechanics install most stock and aftermarket parts and accessories including exhaust systems, fuel components, air and induction throttle bodies, cold air intake systems and intake manifolds as well as all exhaust, brake systems and drive train components. Take advantage of our special dyno testing specials before you install new performance parts so you get a baseline horsepower and torque number for your car so you can keep track of the gains you make as you progress with your project car.
    Take advantage of our 20% off installations or dyno runs for $49.99 by Appointment Only (valid through 6-30-14).
    - Ring and Pinion Gears, Starting at only $275
    - Headers and Exhaust Kits, Starting at only $150
    - Lowering Springs, Starting at only $175
    - Shocks & Struts, Starting at only $175
    - Cold Air Intake Kits, Starting at only $80
    - Custom Tuning (Price Varies, by Appointment Only)
    Stop in to shop our huge performance parts and accessory superstore & showroom in Deland, Florida and schedule an install or dyno run.
    You can also contact us by email at installation@brothersperformance.com or by phone at 1-800-486-2681.

    This entry was posted in News, Special Offers and tagged Brothers Performance, dyno test center, dyno testing, parts and installation center, dyno tune, dyno tuner on April 4, 2014 by Brothers Performance.

  • 2015 Mustang Convertible Tech

    For starters here is the latest 2015 Mustang convertible tech. The new Mustang convertible drop top that will be released later this year was engineered from day one to be a convertible, whereas the previous Mustang convertibles were basically just a coupe with their tops chopped off and a few structural enhancements added after the fact to compensate for the loss of structural integrity. Well the all-new 2015 Ford Mustang convertible has been designed from the ground up as an open-top model with unique bodywork . In plain terms, what this means is that Ford engineers were able to make the 2015 Mustang Convertible stiffer (with 13 percent better torsional rigidity, for all you car geeks who might be wondering). This accomplishes two key things: smooths out the ride by enabling the car’s suspension system to do its job better, and gets rid of the obnoxious flexing in the chassis transmitted to the cabin when driving over rough surfaces. Now, couple the stiffer structure with the improved IRS suspension Ford added for 2015 and presto: The new Ford Mustang Convertible should be in another league, not only in terms of ride comfort, but also in driving dynamics, when compared to the outgoing model. Ford have also ditched the cheap vinyl top from the previous base Mustang Convertible and now  all 2015 models will come with a high-end fabric top that is nicer even than the one available as an upgrade on the outgoing car. The new ragtop has an added layer of insulation, which Ford says helps keep the interior nearly as quiet as that of the 2015 Mustang Coupe. Ford engineers have replaced the hydraulic top mechanism with an electro-mechanical one that is quieter in operation. More importantly, it lowers and raises the roof in half the time it previously took. The system is also more compact, so the top can tuck further away for a cleaner look and more space in the trunk and rear seat. Ford have also swapped the two latches on either side of the windshield header with a single one in the middle for easier operation. We think with all these changes Fords one and only convertible will be a big seller world wide when it is realeased later this year to the global market place.

    This entry was posted in 2015 Ford Mustang News and tagged 2015 Mustang, mustang convertible, 2015 ford mustang convertible on April 1, 2014 by Brothers Performance.

13-16 of 16

Page:
  2. 1
  3. 2
  4. 3
  5. 4
Search
Recent Posts
Archives
Meta
 
Email specials

Information

Customer Service

Account
 
Top Categories

  1. Mustang

  2. Mustang

  1. CAMARO

  2. CAMARO

  1. CHALLENGER

  2. CHARGER

  1. CORVETTE

  2. ECOBOOST

Payment Options
Brothers Performance sells aftermarket performance automotive parts for a wide range of vehicles. Brothers Performance is not sponsored, affiliated, or otherwise connected in any way to any of the manufacturers named on our website or promotional materials. Brothers Performance’s use of any registered trademark is for reference purposes only and all trademarks are the property of their respective owners. Including but not limited to trademark owners Ford Motor Company, Roush Enterprises, Saleen Incorporated, General Motors Company, FCA US LLC, Toyota Motor Corporation, and Nissan Motor Company. This includes any of their trademark terms such as, but not limited to Mustang, Camaro, Charger, Challenger, F150, Ram, Cobra, Bullitt, Mach1, GT500, GT, S281, SS, EcoBoost, R/T, Magnum and Hellcat.

Site Map