May 2012 Ford Racing News
2/24 CRATE ENGINE WARRANTY
Ford Racing announces that it has doubled the limited warranty on crate engines to 2 years or 24,000 miles effective May 1, 2012. In announcing the extended warranty, Ford Racing will go further by making the 2 year 24,000 mile warranty retroactive to all engines purchased since January 1, 2012. The crate engines covered by this 2/24 warranty range from the best-selling 340 horsepower X302, to the 414 horsepower 5.0L 4V Ti-VCT Mustang GT engine and all the way to the 535 horsepower Z427. In all, 14 different versions of Ford Racing Crate Engines are included. The 2/24 Crate engine Warranty will be featured in advertising, event trailer displays and communications throughout 2012. Ford Racing Crate Engines Here
TRACK KEY AVAILABLE FOR 2013 BOSS
TracKey is now available for the 2013
Mustang Boss 302. TracKey has been designed by Ford Racing Calibration Engineers to optimize the Boss 302 for track use. It employs many of the same software algorithms and features used in some of Ford Racing’s turn-key race cars, like the Mustang Boss 302R, Boss 302S, and Cobra Jet. In addition to track mode, the TracKey allows an owner to maintain the smooth driveability of the production car by switching ignition keys. The calibration is available through any Ford dealer for the suggested retail price of $302.00
VALUE PRICED ENGINE PARTS
Take advantage of these engine parts that have been priced to sell – Quantities are limited!
302 CRANK /RODS/PISTONS KIT For-M-9000-302RAKIT – 302 Rotating Assembly with premium Eagle® forged crank and rods and standard bore Mahle® pistons w/ rings.
521 STROKER KIT FOR 429/460 For-M-6013-521 – This is the same rotating assembly as used in the 521 Crate Engines. It’s all premium parts – SCAT® Cast Crank, Eagle® H-Beam Rods Probe® pistons w/ rings and crank and rod bearings. Another smoking deal price at $1249.99
351W SINGLE PLANE “VICTOR JR.” INTAKE MANIFOLD For-M-9424-V351 – This is a Edelbrock® Victor Jr intake for 9.5” deck blocks priced at $319.99
351W OIL PUMP For-M-6600-351STD – We have a limited supply of Melling® 351W standard volume/pressure oil pumps that are value priced at $39.99
A460 BIG BORE BLOCK IS NOW AVAILABLE COBRA JET 3 FOR 3 IN ADRL SERIES
In response to the trend for bigger displacement Big Blocks, a Big Bore version of the A460 block has been added. With a rough bore of 4.490” (+- .003”), it has been machined an extra 0.130” to simplify the build of big bore engines. This block will support a finished bore range from 4.500” - 4.600” Part #: For-M-6010-A460BB
BILLET STEEL GEROTOR OIL PUMP
This new oil pump was developed for the 2013 Cobra Jet Supercharged 5.0L Ti-VCT engine program and features a billet steel gerotor set. This pump is produced to exacting tolerances and each pump is pressure and flow tested. These are unmatched in the market and recommended for race and power adder applications. Part #: For-M-6600-SCJ
The Ford Cobra Jet is 3 and 0 against the Dodge Challenger Drag Pack in the first three rounds of ADRL’s new Supercar Showdown series. Bo Butner won the first two rounds at Houston and Bristol. Chris Holbrook won the most recent round at Maple Grove, PA. The Cobra Jet currently competes against the Dodge Challenger Drag Pack and GM’s COPO Camaro is expected to enter the series later this year. The next round of the ADRL Supercar Series is June 1-2 at Gateway Motorsports Parks in Madison, Illinois.
2013 COBRA JET PARTS AVAILABLE
In preparation for the 2013 Cobra Jet build, Ford Racing is offering a limited number of advance order Cobra Jet parts for the DIY car builder. The 2013 Mustang Competition Kit , For-M-607100-K13, features a Mustang BIW, front and rear fascias, interior parts and trim needed for a drag or road race car build. 2013 Cobra Jet engines will also be made available in both naturally aspirated, For-M-6000-CJ13, and supercharged, For-M-6000-SCJ13, configurations. Ford Racing has worked with NHRA to legalize fixed back racing seats. For-M-16620-CJ13 is legal for 2008-2013 Cobra Jet models. These Cobra Jet parts are available to order through June 1, 2012. Order now during this special advance order opportunity!
Please call us to order these part numbers as they have limited availability and require special handling - 800-486-2981
