- Increases Exhaust Flow for Maximum Performance
- Large 1-7/8" Primaries for Maximum Flow
- 16 Gauge Steel Tubing and 3/8" Thick Flanges
- Direct Bolt-On for Easy Installation
- Gaskets and Hardware Included
- Show Quality Chrome Finish
- Requires Midpipe Kit 40441 or 40442 and O2 Wire Harness Extensions (Sold Separately)
- O2 Wire Harness Extensions Part# BBK-1113 is required for ALL Automatic transmission applications only - 1 drivers side front - 1 drivers side rear
- O2 Wire Harness Extensions Part# BBK-1122 Front Kit and Part# BBK-11221 Rear Kit are required for all Manual Transmission applications.
More Power & Aggressive Tone
Increase the horsepower output of your 2016-2019 Camaro SS with these chrome BBK Performance Long Tube Headers. BBK Performance headers will increase your exhaust flow giving you additional horsepower and torque across the entire RPM range. BBK Long Tube Camaro Headers not only decrease backpressure but help to balance out the exhaust pulses with their long, equal length primaries. Besides the horsepower and torque gains this will typically add a unique growl to your exhaust system.
Great For Supercharged Applications
The 1-7/8" Camaro header is more oriented toward supercharged or nitrous applications. Supercharged Camaro applications see significant gains from headers of any size, but the larger 1-7/8" primary size will result in even better gains. They can be used on naturally aspirated applications as well, but typically are best suited for max effort builds using an aftermarket intake manifold and upgraded camshaft.
BBK Performance Camaro headers are made from 1-7/8" CNC-machined mandrel bent tubing with 3/8" thick die-stamped flanges. These headers are pressure tested to ensure leak free performance. Their heavy gauge steel construction and high quality gaskets and hardware help to ensure a long service life.
BBK full length Gen 6 Camaro headers are designed as a direct bolt on with either our off road or high flow catted mid pipe kit (sold separately). Kit includes all required gaskets and hardware for installation. Installation can be accomplished in approximately 4-6 hours with basic tools, though some cutting of the factory pipes is required.
As with any long tube header installation, BBK recommends custom tuning for their 1-7/8" Camaro long tube headers. Not only will you need to disable the rear oxygen sensors to prevent check engine lights, but to get the maximum power gains and proper drive ability you're going to need a custom tune. Most applications using this large primary size will typically incorporate other mods that require custom tuning anyway, so this just a normal part of the build.
This part is not legal for use in California or any state that has adopted California emissions standards. Please check your state and local emissions laws to ensure compliance.
2016-2019 Camaro SS