- Description
-
Details
- Add Up to 300 RWHP at the Flip of a Switch
- Holley/Carter Squarebore Style Plate Maximizes Atomization for Proper Fuel Distribution
- "Wet" Style Kit Includes Nitrous and Fuel Solenoids
- Includes Jetting for 190, 225, 275 & 300 RWHP
- Includes a 10 lb. Nitrous Bottle with High Flow Bottle Valve
- Bottle Brackets and All Required Wiring Included
- Includes Microswitch for WOT Activation
High Volume Kit for Up To 300 RWHP Gain!
Nitrous Oxide Systems (NOS) has long been one of the most recognized names in nitrous oxide kits. The NOS Big Shot nitrous kit is best suited for full-on race cars. Racers know that a nitrous kit is an easy and affordable way to add big power to your engine. It's only there when you need it, which is great for race cars that also see some street use. Nitrous kits are easily adjustable to grow with the user's power demands or to compensate for changing track conditions. In just a couple of hours you can increase your car or truck's output by as much as 300 rear wheel horsepower with the kit as delivered.Complete Kit
This NOS Big Shot squarebore nitrous kit is a complete kit, utilizing large solenoids for high volume and includes everything you need to get started. You can just bolt it on, wire it up, fill the bottle and you're good to go. Some additional accessories may be helpful depending upon the intended usage. Many users add an RPM window switch for maximum safety, where avid racers may opt for a nitrous controller for maximum control at the track.Easy Installation
NOS Big Shot nitrous kits can typically be installed in a couple of hours and only requires basic tools. Wiring the solenoids and activation switch is very simple using the detailed instructions included in the kit.Tuning Notes
NOS Big Shot systems are designed for use on highly modified engines and is intended primarily for competition applications. To supply the proper amount of fuel to the carburetor and Big Shot system, a fuel pump must be used that is designed to operate between 5 and 10 psi, with a flow rate of at least 0.1 gallons per horsepower per hour at 6 psi. High cylinder pressures are generated with the use of these kits and this greatly increases the load on internal engine components.Fits
Most V8 Engines with Holley, Carter or other Sqaurebore Style Carburetors
