800.486.2681 Monday-Friday 8AM - 5 PM EST
BBK 73mm Throttle Body (11-17 Mustang V6)

BBK 73mm Throttle Body (11-17 Mustang V6)


Market Price $619.99 You save $170 (27%)

Part # BBK-1822

BBK Performance 1822

Ships Within 24 Hours
10+ In Stock

Availability: In stock



  • Bolt On 8-12 RWHP in Minutes
  • Large 73mm Throttle Body Bore for Maximum Airflow
  • Precision CNC Machined Aluminum Casting
  • Direct Fit Replacement for Easy Installation
  • Designed and Manufactured In USA
  • 2017 F150 Requires Modification
  • More Power and Better Throttle Response
    Increase throttle response on your 2011-2017 Mustang V6 or F-Series EcoBoost & 3.7L V6 with this BBK Performance 73mm throttle body. BBK Performance throttle bodies improve throttle response and provide quicker acceleration. This throttle body will increase airflow to your engine, adding more horsepower and torque to the wheels. Though this Mustang throttle body will boost your engine's horsepower output by 8-12 rear wheel horsepower, it does this without decreasing fuel mileage and doesn't require custom tuning.

    Top Quality Construction
    BBK Performance S197 Mustang throttle bodies are CNC machined from high quality 356 aluminum castings to ensure perfect OEM quality and fit every time. Features new electronic controls and injection molded plastic gear assemblies for the modern drive by wire application. BBK Performance Throttle Bodies are designed and manufactured in the USA.

    Hassle Free Installation
    This throttle body is much larger than the stock 68MM throttle body but is a direct fit replacement for a hassle free installation, requiring no modification to your intake manifold. It typically only takes about 30 minutes to install on your V6 Mustang and only requires basic hand tools. See detailed installation instructions linked below. This will not fit 2017 F150 3.5 Eco Boost Application without Modification. On 2017+ models the connector is located facing passenger side. Requires extending the OEM wire harness for fitment.

    Will It Work With My Cold Air Intake?
    Yes! Though it has a significantly larger inner bore diameter, the outside is only a tiny bit larger than a stock throttle body. This allows you to use any cold air intake designed for this car, or even the factory inlet tubing. We would recommend a cold air intake for best results, as it will ensure plenty of unrestricted airflow to the throttle body.

    Emissions Legal
    This BBK throttle body is 50-state emissions legal. CARB EO# D-245-17

    2011-2017 Mustang 3.7L V6
    2011-2014 F-Series Truck EcoBoost 3.5L, 3.7L V6
    This will not fit 2017 F150 3.5 Eco Boost Application without Modification. On 2017+ models the connector is located facing passenger side. Requires extending the OEM wire harness for fitment.

    Product video



    TravisG 7/18/2016
    Just Do it! I had my doubts about this product buying it, not expecting it to be as good as some had built it up to me. After installing it, which took about a half hour due to the tight fit of the intake going on, and turning the car on it took about 45 minutes. My opinion, go for it and get this throttle body! the minute you start the car and rev it there's a noticeable change in sound as the air rushes through. Drive down the road and you can feel the improved throttle response. Get on a straight away, open her up and OH MY GOD WHAT IS THIS?! As I slowed down, both my girlfriend and I were in awe at the incredible and noticeable power gained from this. Without a doubt this is definitely worth every penny you'll spend on it. I can't wait to keep adding on, as this throttle body just made me that much more eager!
    FRANKIN-STANG 10/14/2014
    CHERRY ON TOP !!! I have been putting mods on my 2013 mustang 3.7 for 2 years now, BBK long tube headers, off-road x-pipe, 4.10 Ford racing gears, Hurst comp plus shifter, Airaid cold air intake, Accell super coils, SCT tuner, and a whole lot more, and I noticed gains in power and performance along the way, but today I added a BBK 73mm Throttle body, and I'm here to tell you that this is the cherry on top! Oh I gained Horsepower, but even more it seamed to pull everything together, power gain, quicker throttle response, and the sound of all that air rushing into the motor, put one big smile on my face!!!! worth every penny....
    Joe 9/12/2014
    BBK throttle body Product worked great and this throttle body installed in about 15 minutes without any adjustment. Horsepower gains are very noticeable but not a cheap upgrade as they come with all new electronics but is a top notch part and I'll be adding the BBK air intake next
    JohnC 7/2/2014
    Drastic throttle response improvement This was a simple upgrade and definitely made a difference in throttle response. Seems like I can hear more of a roar from my cold air intake as well.

    4 Item(s)

    4 Review(s)