- Perfect clutch kit for street/strip Corvettes
- 90% more holding power than the factory clutch
- 11" diameter clutch disc
- 1-1/8" 26-spline input shaft
- Includes pressure plate, clutch disc, throwout beacing, bolts & alignment tool
Increased Holding Capacity With No Chatter
Whether it's time to replace the worn out clutch in your 1994-96 Corvette or you need a clutch to handle the power of your bowtie, Centerforce has you covered. This Corvette Dual Friction clutch kit is at home on the street or for on the track for mild competition. A unique centrifugal counterweight system applies up to 90% more holding power than the factory clutch as RPM's increase. With equal pedal effort and smoother engagement than the factory clutch, this kit is the perfect street clutch for your high performance Vette.
The Perfect Performance Street Clutch Kit
Each Centerforce Dual Friction kit features a performance matched pressure plate & clutch disc designed to operate smoothly at all RPM's. The Dual Friction disc has a full facing on the pressure plate side for drivability and a carbon composite puc-style facing on the flywheel side for positive engagment making it the ultimate street performance clutch.
Corvette: 1994, 1995, 1996
The best way to break in your new Centerforce Dual Friction clutch is by driving 450-500 miles in stop & go conditions. The idea is to cycle the clutch as much as possible without putting too much heat into it. Highway miles should not be included during the break in mileage.
Replacing the throwout bearing is highly recommended and the factory flywheel should be replaced or resurfaced prior to operating a new clutch.