Camshaft sprocket bolt........................................30 to 36
Camshaft thrust plate bolts .................................72 to 120 in-lbs
Timing chain cover-to-pock bolts ........................15 to 22
Water pump-to-timing chain cover bolts.............15 to 22
Oil pan mounting bolts ........................................84 to 108 in-lbs
Oil pump and filter body to front cover
8mm bolt........................................................17 to 23
6mm bolt........................................................72 to 96 in-lbs

Cylinder head bolts
1994 and 1995
Step 1..........................................................15
Step 2..........................................................29
Step 3..........................................................37
Step 4..........................................................Loosen 2 to 3 turns (DO NOT loosen all the bolts at the same time, from this point on work on one bolt at a time)
Step 5
Long bolts................................................11 to 19
Short bolts ...............................................7 to 15
Step 6..........................................................Tighten an additional 90-degrees

1996 and later
Step 1..........................................................15
Step 2..........................................................29
Step 3..........................................................36
Step 4..........................................................Loosen 2 to 3 turns (DO NOT loosen all the bolts at the same time, from this point on work on one bolt at a time)
Step 5
Long bolts................................................29 to 37
Short bolts ...............................................11 to 18
Step 6..........................................................Tighten an additional 180-degrees

Rocker arm fulcrum bolts
1994 and 1995
Step 1..........................................................44 in-lbs
Step 2..........................................................19 to 25
1996 and later
Step 1..........................................................44 in-lbs
Step 2..........................................................22 to 29

Intake manifold-to-cylinder head bolts
1994 and 1995
Step 1..........................................................96 in-lbs
Step 2..........................................................15
1996 and later
Step 1..........................................................72 in-lbs
Step 2..........................................................108 in-lbs
Exhaust manifold bolts ........................................23 to 26
Crankshaft pulley-to-vibration damper bolts ..................................................................20 to 28
Valve cover bolts .................................................72 to 108 in-lbs
Vibration damper bolt..........................................103 to 132
Flywheel/driveplate mounting bolts .....................54 to 64
Wheel lug nuts.....................................................85 to 105
Spart plugs ..........................................................7 to 14
Firing order..........................................................1-4-2-5-3-6Firing order

*After assembly, retorque with the engine hot.

- For complete teardown and rebuilds, Brothers Performance highly recommends the purchase of a Haynes or Chilton Shop Repair Manual for your application.
- Specifications are a general guide.
- Brothers Performance does not accept responsibility for any inaccuracies or misprints. We recommend that all specifications are obtained from vehicle manufacturer.